C 230K (202.024) L4-2.3L SC (111.975) (2001)
Timing Chain Tensioner: Service and Repair
AR18.40-P-4150A Replacing Non-Return Valve (Oil Reservoir of Chain Tensioner)
Replacing Non-Return Valve (Oil Reservoir Of Chain Tensioner)
1
Remove timing case cover
2
Use suitable pliers (1) to withdraw non-return valve (8) from the crankcase
CAUTION: Installation: press in new non-return valve (8) by hand.
NOTE: The non-return valve (8) prevents the oil reservoir for the chain tensioner running dry when the engine is switched off. See oil circuit.
3
Install in the reverse order.