C 230K (202.024) L4-2.3L SC (111.975) (2001)
/l4-2.3l_sc_(111.975)/Page-1773001.png)
Control Assembly: Service and Repair
Replacing Bulbs In Control Module For Automatic Heater (HEAT)
Replacing bulbs in pushbutton control module
Illustrated On Model 202 With Automatic Heater (HEAT)
1
Pull off control knobs (1,2)
2
Press covers (arrows) to side and move to non-actuated position
3
Replace bulb
NOTE: For this purpose slide a piece of insulating tubing (A, dia. 5 mm) over bulb and pull out.
4
Reinstall in opposite order.
