C 230K (202.024) L4-2.3L SC (111.975) (2001)
Control Assembly: Service and Repair
Replacing Bulbs on Control Module For A/C (AAC)
Replacing bulbs on pushbutton control module for air conditioning (automatic)
Illustrated On Model 210
1
Remove pushbutton control module
NOTE: For this purpose press in radio removal plates.
2
Turn bulb holder (1) 90 degrees to left and remove
NOTE: One or two bulb holders are installed depending on the control module manufacturer.
3
Pull bulb (2) out of bulb holder (1)
4
Reinstall in opposite order.