C 230K (202.024) L4-2.3L SC (111.975) (2001)
Electronic Throttle Actuator: Service and Repair
AR30.20-P-1262A Remove/Install Electronic Accelerator Actuator With Flap Connection
Shown On M112 Engine
Removing, installing
1
Remove cylinder head cover trim or air filter
NOTE: Removal: Remove air filter housing or cylinder head cover trim by lifting upwards from the cylinder head covers.
Installation: Moisten the retaining rubber on the cylinder head covers and the hot film mass air flow sensor seal in the air cleaner housing lightly
with lubricant.
2
Remove hot film mass air flow sensor together with air intake pipe