mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AP54.10-P-5410A Batteries - Checking and Correcting Fluid Level|Page 4518 > < AP54.10-P-5410A Batteries - Checking and Correcting Fluid Level|Page 4516
Page 1
background image

Battery: Testing and Inspection
AP54.10-U-5453A Battery (AGM/VRLA) - Check Condition

Battery (AGM/VRLA) - Check Condition

Battery test with Midtronics MCR 717

With introduction of the new "Midtronics MCR 717" battery tester, a new testing method is applied for all types of batteries used by DaimlerChrysler
(wet cell and AGM/VRLA batteries).

AGM/VRLA batteries can no longer be tested with the previous methods. Additionally, the acid level can not checked, do not open/remove the cover
from the AGM/VRLA battery.

In the future, measurement of the acid density, has been eliminated just as has testing the load for all types of batteries.

This also eliminates the acid density test sheet when filling out warranty and goodwill claims. For this purpose enter test code (indicated by tester) in text
field "Message text" of the G/K proposal form in the event of a negative test result

IMPORTANT NOTE:

Warranty/goodwill claims where a wet cell/lead calcium/AGM/VRLA battery is installed in the course of repair, will now only be recognized when the
test result (result code) is entered on the repair order and in the message field on the warranty/goodwill claim.

AP54.10-P-5410A Batteries - Checking and Correcting Fluid Level|Page 4518 > < AP54.10-P-5410A Batteries - Checking and Correcting Fluid Level|Page 4516