C 230K (202.024) L4-2.3L SC (111.975) (2001)
Level Control Solenoid Valve: Testing and Inspection
Testing Pressure At Rear Axle Level Controller
DANGER:
-
Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure Risk of poisoning from swallowing hydraulic fluid
-
Render the hydraulic system pressureless before commencing work on system Wear protective clothing and eye protection
1
Drain hydraulic system
CAUTION: General notes for working on vehicles with level control / ADS
2
Connect tester to level controller
3
Fill the reservoir with fluid (2)
CAUTION: Raise the fluid level to approximately 0.5 litres above the MAX graduation (a) on the dipstick (2a) for the test