C 240 4MATIC Sedan (203.081) V6-2.6L (112.916) (2005)
Shown On Model 203.0
1
Remove door liner from rear door
2
Disconnect left rear door speaker group connector (H4/5x1) and right rear door speaker group connector (1-14/6x1)
3
Remove screws of housing (3)
See "Special Tool" given below.
4
Take off housing (1) together with left rear door speaker group (H4/5); right rear door speaker group (H4/6)
5
Separate connectors (5) of speaker 2 (H4/5h2, H4/6h2)
6
Remove screws of housing cover (4)
See "Special Tool" given below.
7
Remove housing cover (2) with speaker 2 (H4/5h2, H4/6h2)
8
Unclip speaker 2 (H4/5h2, H4/6h2) and take out of housing cover (2)
9
Separate connectors of speaker 1 (H4/5h1, H4/6h1)
10
Take speaker 1 (H4/5h1, H4/6h1) out of housing (1)
11
Install in the reverse order
12
Perform function check
Special Tool
Torx Bit Set