C 240 4MATIC Sedan (203.081) V6-2.6L (112.916) (2005)
Oil Level Sensor: Procedures
AR18.40-P-5111A Remove/Install Oil Level Sensor
Remove/Install Oil Level Sensor
Shown On Engine 112
DANGER:
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
1
Evacuate engine oil, drain
2
Remove lower part of oil pan (1)
3
Unplug connector (3) at oil level sensor
4
Unscrew bolts of oil level sensor (2)
5
Remove oil level switch (S43)
6
Install in the reverse order.
AR18.40-P-5111PW Remove/Install Oil Level Sensor
Remove/install oil level sensor