C 240 4MATIC Sedan (203.081) V6-2.6L (112.916) (2005)
Special Tools
Pushing off
Rear axle center assembly without side bearing cover.
1
Use suitable screwdriver to press radial sealing ring (32a) out of housing.
Shown on rear axle differential 0 198 mm in assembly stand
Component Identification
Pressing in
2
Coat new radial sealing ring (32a) on sealing lip with oil.
3
Press in radial sealing ring (32a) using a drift (032c).
Press radial sealing ring (32a) evenly into the housing to prevent leaks.
Shown on rear axle differential dia. 198 mm