C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
/v6-2.6l_(112.916)/Page-3603006.png)
^
Remove idler pulley bolt (arrow, Figure 8) and idler pulley (A).
Installation Note:
When reinstalling, torque bolt (A) to 68 Nm.
^
Remove engine belt from alternator pulley (do not remove belt from vehicle) refer to WIS: Group 13.22
^
Model 203 4Matic/211 4Matic only: Unclip heater hose (A, Figure 9) from mounting clip (arrow).
^
Disconnect circuit 61 harness connector (arrow, Figure 10) from regulator.
^
Raise vehicle on vehicle lift then remove lower (center) engine cover.
^
Remove circuit 30 terminal cover (A, Figure 10).
