C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
/v6-2.6l_(112.916)/Page-3194014.png)
Shown on Model 203.0
DANGER:
-
Risk of explosion from electrolytic gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Injury hazard and
danger of burning skin and eyes when handling battery acid or handling damaged lead-acid batteries.
-
No fire, sparks, naked flames or smoking.
-
Wear acid protection gloves, clothes and goggles. Pour battery electrolyte only into suitable and appropriately marked containers.
1
Disconnect ground cable of battery
2.1 Remove operating and display unit with control module
-
With CODE (352a) COMAND operating and display system
2.2 Remove radio
3
Remove stowage compartment below radio
NOTE: When removing radio.
4
Remove sound-proofing measure
5
Unscrew screws (1)
NOTE: Three screws.
-
See "Special Tools" given below.
6
Remove right vent flap actuator motor (M2/20) from AC housing
7
Disconnect connector (3) from right vent flap actuator motor (M2/20)
8
Install in the reverse order
9
Synchronize right vent flap actuator motor (M2/20).
Special Tools