C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
Correct oil level in air conditioning system after replacing parts.
2
Remove upper frame cross member (1)
3
Take off cover (2)
4
Detach lower engine compartment paneling.
NOTE: Front paneling.
5
Disconnect connector (4) from refrigerant pressure and temperature sensor (B12/2)
6
Unscrew nut (5)
-
Nut for refrigerant lines on condenser: 8 N.m
7
Pull pressure lines (6, 7) out of condenser (8)
CAUTION: Plug openings.
-
See "Special Tools" given below.
CAUTION: Installation: Replace O-rings.
-
Moisten threads and O-rings with compressor oil.
8
Remove condenser (8)
NOTE: Press clips (9) together, remove condenser (8) at top and unhook from brackets (10) at bottom.
8
Remove condenser (8).
CAUTION: Do not damage radiator (8) and condenser.
10
Install in the reverse order.
Special Tools
Set of Plugs, P/N# 129 589 00 91 00