C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
8. Replace burnt out license plate bulb(s)
9. Reinstall license plate lamps
If a license plate resistor wiring harness was previously installed, only replace the burned out bulb(s).
Parts Information
NOTE:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
November 7, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty
Operation: Wire harness adapter - license plate lamps, install (02-4542)