C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
8
Tighten nut (19b) on the repair bolt (19c)
CAUTION: The repair bolt (19c) should not be turned after it is positioned. When tightening the nut (19b) always hold the repair bolt
(19c), as the alignment studs in the lower control arm's rubber bushing (4) will be sheared off if the bolt moves.
9
Adjust rear axle toe
10
Adjust front axle toe
AR40.20-P-0323P Check and Adjust Front Axle Toe
Check And Adjust Toe On Front Axle
Model 203 Without 4MATIC Shown
Model 203 Without 4MATIC Shown