C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
/v6-2.6l_(112.916)/Page-2020001.png)
Crankshaft Position Sensor: Service and Repair
Remove/Install Crankshaft Position Sensor
Shown On Engine 113 In Model 220
Work Instructions
NOTE: Remove Air cleaner (engine side).
Crankshaft position sensor to engine block - 8 N.m
NOTE: If the crankshaft position sensor (L5) was replaced, a re-initialization must be carried out with STAR DIAGNOSIS in the menu item control
module adaptations.
