C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
/v6-2.6l_(112.916)/Page-3388003.png)
7.
Slip the solder connector (A002 546 13 41) onto the cut wire. Strip approximately 15 mm of insulation from the repair harness wire and the SCM
harness wire. Braid the 15 mm stripped ends of the repair wire and SCM harness wire (Figure 3). Solder the wires in accordance with the specified
repair method in WIS document AR54.18-P-0100-06A (Figure 4 and 5).
8.
Repeat steps 2 to 4 for the brown wire (0.5 BN) at pin 12.
9.
Repeat steps 2 to 4 for the green wires (0.5 GN) at pin 5 and 11.
