C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
/v6-2.6l_(112.916)/Page-2799004.png)
^
Remove upper alternator mounting bolt (B, Figure 2).
^
Loosen lower alternator mounting bolt (A, Figure 2) from mounting bracket (arrow).
^
Disconnect circuit 61 harness connector (arrow, Figure 3) from regulator.
^
Remove circuit 30 terminal cover (A)
^
Remove nut (arrow, Figure 4) then remove circuit 30 harness connector (A) from terminal stud.
^
Remove lower alternator bolt (A, Figure 2) from mounting bracket.
^
Remove alternator (B, Figure 4) from mounting brackets.
Note:
Do not remove alternator (B) from engine compartment.
