mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR46.10-P-0810P Remove/Install Electronic Ignition/Starter Switch (EIS/EZS)|Page 11612 > < Diagram Information and Instructions|Page 11609
Page 1
background image

Ignition Switch: Service and Repair
AR46.10-P-0810P Remove/Install Electronic Ignition/Starter Switch (EIS/EZS)

Removing And Installing Electronic Ignition/starter Switch (EIS)

DANGER:

-

Risk of explosion from hydrogen gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury to eyes and
skin suffering caustic burns from battery electrolyte or from contact with damaged lead acid batteries.

-

No fire, sparks, open flames or smoking.

-

Wear acid-resistant gloves, clothing and glasses. Pour battery electrolyte only into suitable and appropriately marked containers

1

Disconnect ground cable of battery

AR46.10-P-0810P Remove/Install Electronic Ignition/Starter Switch (EIS/EZS)|Page 11612 > < Diagram Information and Instructions|Page 11609