C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
Special Tools
Component Identification
Insert puller legs between rear protective cap (if installed) and propeller shaft intermediate bearing (see detail).
1
Pull rubber mount (7) together with grooved ball bearing and front protective cap (if installed) off the joint fork.
Protective caps are not installed at the grooved ball bearing, on either the stem or fork side on models 203, 208, 210, 170 and with models 129, 140,
202 as of 6/95.
AR41.10-P-0100-06DA Pull Rubber Sleeve Onto Joint Fork
AR41.10-P-0100-06DA Pull rubber sleeve onto joint fork