C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
/v6-2.6l_(112.916)/Page-2381001.png)
Flex Plate: All Technical Service Bulletins
Starting System - Tip Start Cycle Ends Prior to Start-Up
Date: August 18, 2008
Order No.: S-B-15.30/68
Supersedes: MB-Net No. 113 dated March 8, 2000
Group: 15
SUBJECT
Tip Start Cycle Ending Prior to Engine Starting
If you receive customer reports in the above model vehicles of the tip start cycle ending prior to the engine starting, this may be due to the tachometer
momentarily jumping above 2000 rpm causing the starting procedure to be aborted before the engine starts. To resolve, perform the below steps.
1.
Remove starter per WIS instructions below.
2.
Lightly coat teeth of starter ring gear with paste, A000 989 76 51.
Note:
