C 240 Wagon (203.261) V6-2.6L (112.912) (2003)
Suspension Control Module: Service and Repair
Rear Suspension-control Module, Removal And Installation
Illustrated Using Model 203.2
DANGER:
-
Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure Risk of poisoning from swallowing hydraulic fluid
-
Render the hydraulic system pressureless before commencing work on system Wear protective clothing and eye protection
1
Drain hydraulic system
NOTE: Installation: Recharge hydraulic system
CAUTION: General notes for working on vehicles with level control / ADS
2
Disconnect high-pressure supply lines (S1, P) from suspension-control module (3)
3
Disconnect return line (T) from suspension-control module (3)
4
Detach linkage rod for suspension-control module (7) from torsion bar