C 280 (202.029) V6-2.8L (112.920) (1999)
Oil Pan: Service and Repair
AR01.45-P-7555VA Remove/Install Bottom Part of Oil Pan
Remove/install bottom part of oil pan
Remove/Install
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Remove engine compartment paneling.
2
Remove underride guard.
NOTE: On model 463 except 463.246 the underride guard is fastened with 4 bolts. Model 463.246 with Engine 113.982.
3
Drain and collect engine oil
NOTE: Installation: Replace sealing ring of oil drain plug.
4
Detach fixture of automatic transmission ATF lines at bottom part of oil pan.
5
Unscrew oil pan bottom section (1).
6
Remove oil pan bottom section (1).
NOTE: Installation:
-
Application of sealing compound to oil pan bottom section: Engine 112.
-
Information on application of sealant to oil pan.
7
Install in the reverse order.