C 280 (202.029) V6-2.8L (112.920) (1999)
Flex Plate: Service and Repair
AR03.30-P-5000B Remove/Install Retaining Lock For Crankshaft/Ring Gear
Remove/Install Retaining Lock For Crankshaft/Ring Gear
Shown On Engine 112
DANGER:
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Remove starter
2
Insert retaining lock (1)
NOTE:
-
Push retaining lock (1) into starter opening and allow to latch in ring gear; if necessary rotate engine at crankshaft in direction of rotation
-
If automatic transmission fitted, do not counterhold at ring gear (with retaining lock) in order to remove the central bolt! But use
counterholder.
3
Install in the reverse order.