C 280 (202.029) V6-2.8L (112.920) (1999)
/v6-2.8l_(112.920)/Page-3797001.png)
Wiper Motor: Service and Repair
Moving Wiper Motor Into Rest Position
Model 208, 210, 220
Model 202
1. Connect wiper motor to connector (M6/1x1)
2. Hold wiper motor with left hand
3. Switch on ignition
4. Operate combination switch "stage 1"
5. Turn combination switch back to "stage 0"
6. When wiper motor is in rest position, switch off ignition
7. Disconnect wiper motor from connector (M6/1x1)
