C 280 (203.054) V6-3.0L (272.940) (2006)
Component Identification
8
Insert the outer plate (3) into the assembly insert (D3).
The outer plate (3) is held magnetically.
Component Identification
9
Place the rivet press tool (01) in such a way that the spacer webs of the assembly insert (F4) lies on the rolls of the timing chain (4).
Ensure that the riveted link (1) and the outer plate (3) are aligned.
10
Screw in the pressure screw (02) at the rivet press tool (01) until there is solid resistance.
While turning the pressure screw (02), ensure that the pins of the riveted link (1) are pressed into the outer plate (3).
11
Remove rivet press tool (01).
Component Identification
Rivet timing chain
12
Shift the assembly insert (D3) on the riveted section (arrow).