C 300 (204.054) V6-3.0L (272.947) (2008)
/v6-3.0l_(272.947)/Page-2646003.png)
The function is described with a mobile phone attached to the connector. Any differences with a mobile phone not attached to the connector and one
operated using Bluetooth are described as information points in each respective component function.
General
The email application enables the user to manage his/her emails (e.g. to read or compose).
The following email functions are available:
^
Receive and read emails
^
Compose and send emails
The email function consists of the following component functions:
^
Receive and read emails
^
Compose and send emails
Operating instructions
Emails can only be composed, read and sent over the Audio/ COMAND control panel (A40/9) and the Audio/COMAND display (A40/8).
Receive and read emails function sequence
Incoming emails are received by the COMAND controller unit in the following way:
^
Multifunction antenna (A28/11)
^
Discrete line
^
Plug connection
^
Discrete line
^
Communication control unit
^
Discrete line
Emails can now be read by running the email application in the "ComTEL/telephone" menu item of the Audio/COMAND display. This is done with the
aid of the "TEL" phone button on the COMAND controller unit and the Audio/COMAND control panel.
The control signals from the COMAND controller unit telephone buttons are processed internally. The control signals from the Audio/COMAND control
panel are forwarded over the telematics CAN to the COMAND controller unit.
The menu item, email application and the selected email are shown on the Audio/COMAND display by the COMAND controller unit over a low voltage
differential signaling (LVDS) line.
On a mobile phone not connected to the connector and operated over Bluetooth, the COMAND controller unit receives emails in the following way:
^
Mobile phone antenna
^
Bluetooth antenna (A2/91)
^
Discrete line
Compose and send emails function sequence
Emails can only be composed and sent over the Audio/ COMAND control panel and the Audio/COMAND display in the email application in the
"ComTEL/telephone" menu item of the Audio/COMAND display.
The email application in the "ComTEL/telephone" menu item is selected using the "TEL" phone button on the COMAND controller unit and the
Audio/COMAND control panel. The control signals from the COMAND controller unit telephone buttons are processed internally. The control signals
from the Audio/COMAND control panel are forwarded over the telematics CAN to the COMAND controller unit. The menu item, email application and
the composed email are shown on the Audio/COMAND display by the COMAND controller unit over a LVDS line.
Emails are then sent to the receiver by the COMAND controller unit in the following way:
^
Discrete line
^
Communication control unit
^
Discrete line
^
Plug connection
^
Discrete line
^
Multifunction antenna
On a mobile phone not connected to the connector and operated via Bluetooth, the COMAND controller unit sends emails to the receiver in the
following way:
^
Discrete line
^
Bluetooth antenna
^
Mobile phone antenna
