C 300 (204.054) V6-3.0L (272.947) (2008)
1. Insert bottom section paneling (2) into rear bumper paneling (1) and arrest.
2. Check whether bottom section paneling (2) is arrested correctly on inside of rear bumper paneling (1), if necessary press in again (see arrows).
3. Fasten paneling bottom section (2) to rear bumper paneling (1) on right and left with sheet metal nuts (3) and 4.2x13 round head hex bolts (4).
4. Insert hole reinforcement (12) into paneling bottom section (2) on right and left.