C 300 (204.054) V6-3.0L (272.947) (2008)
License Plate Bracket: All Technical Service Bulletins
Body - Front License Plate Bracket is Loose
Date: November 26, 2007
Order No.: P-B-88.20/69
Supersedes:
Group: 88
SUBJECT:
Model 204.054/056
License Plate Bracket on Front Bumper Loose
If you receive customer reports in the above model vehicles where the front license plate bracket is loose, this may be caused if the bolt used to fasten the
bracket to the bumper cover is too short. The expansion rivet on the license plate bracket does not expand far enough when the bolt is fully tightened
then the holding force is not achieved. To resolve, install a longer bolt (A163 990 03 36) in the top two mounting holes of the license plate bracket.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
November 26, 2007. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table.