C 300 (204.054) V6-3.0L (272.947) (2008)
/v6-3.0l_(272.947)/Page-3157001.png)
Seat Cover: All Technical Service Bulletins
Interior - Seat Cushion Cover Is Loose
Date: September 17, 2008
Order No.: P-B-91.18/173
Supersedes:
Group: 91
SUBJECT:
Model 204.054/056/081
Seat Cushion Cover is Loose
If you receive customer reports in the above model vehicles of the top portion of the seat cover becoming loose, this may be caused by the fastening strip
not holding. To resolve follow the steps below.
1.
Remove the seat cushion. Refer to WIS document AR91.10-p-3310cw.
2.
Attach clips (A000 991 98 70) as shown in Figures 1 and 2 above.
Note:
It is important to make sure that the metal in the edge of the cushion shell still protrudes noticeably and that the clips click into place and are
held firmly in place.
Parts Information
