C 300 (204.054) V6-3.0L (272.947) (2008)
Shown on left attachment on front bumper (2)
2. Mark hole center points (arrows) through specified holes in front spoiler (1) on front bumper (2).
See picture B.
3. Drill holes (arrows).
See picture B.
Ensure that no other components are damaged when drilling a hole with a diameter of 5 mm.
4. Clean bonding surfaces with specified cleaning agent.
The bonding surfaces must be free of dust and grease.
5. Insert plastic rivets (3).
6. Slide on metal clips (4).
See picture B.
Shown on left attachment on front bumper (2)