C 300 (204.054) V6-3.0L (272.947) (2008)
/v6-3.0l_(272.947)/Page-3233001.png)
Sunroof / Moonroof Weatherstrip: All Technical Service Bulletins
Body - Sunroof Rubber Seal Deformed or Loose
DTB
Date:
September 25, 2008
Order No.:
P-B-77.20/66
Supersedes:
Group:
77
SUBJECT: Model 204.054/056/081
from VIN A211169 to A222988, Equipped with code 414 (Electric Sunroof)
Electric Sliding Roof Rubber Seal Deformed or Loose
If you receive customer reports in the above model vehicles that the electric sliding roof rubber seal is deformed or loose, the cause may be low pull-off
force at the folding rubber seal. To remedy, increase the grip strength of the folding rubber seal onto the upper seal channel by pressing the upper seal
channel together and making the gap smaller (Figure 1).
CAUTION: Please be careful that you do not damage the glass roof panel.
NOTE: The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated
on September 25, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty
Operation: Bellows - right on sliding roof, R&R/replace, if necessary (77-2028)
Bellows - left on sliding roof, R&R/replace, if necessary (77-2027) Code Operation Number Time (hrs.) Model Indicator
