mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Body/Frame - Tail Lamp Cutout Tool Information|Page 17067 > < Body/Frame - Tail Lamp Cutout Tool Information
Page 1
background image

Tail Lamp: Description and Operation

GF82.10-P-2018CW Rear Lamp Unit, Component Description

Vehicle without code (614) Bi-xenon headlamp unit and without code (622) Intelligent Light System (right-hand traffic), shown on model 204.0

Component Identification

Vehicle with code (614) Bi-xenon headlamp unit or with code (622) Intelligent Light System (right-hand traffic), shown on model 204.0

Component Identification

Location

The rear lamp units are located on the left and right of the vehicle rear.

Design

A distinction is made between two variants of rear lamp units. The functionality of the two variants is identical, though. On vehicles without code (614)
Bi-xenon headlamp unit and without code (622) Intelligent Light System (right-hand traffic), the turn signal lights are designed as bulbs.

On vehicles with code (614) Bi-xenon headlamp unit or with code (622) Intelligent Light System (right-hand traffic), the turn signal lights are designed
as yellow light-emitting diodes, which symbolize a C open towards the inside.

The rear lamp units are actuated by the rear SAM control unit with fuse and relay module (N10/2).

Body/Frame - Tail Lamp Cutout Tool Information|Page 17067 > < Body/Frame - Tail Lamp Cutout Tool Information