C 300 (204.054) V6-3.0L (272.947) (2008)
^
Remove 2 lower bolts (arrows, Figure 10).
^
Loosen 2 bolts (A) on inside of storage box.
9. Repeat steps 3, 4, 6, and 8 on opposite side.
10. Remove 4 Tele Aid control module bracket bolts (arrows, Figure 11).
11. Remove Tele Aid control module:
^
Move storage boxes away from Tele Aid control module (A, Figure 11) to gain access to wire harness and cables.
^
Remove bolts (B, Figure 11) securing Tele Aid control module to mounting bracket (C).
^
Disconnect wire harness and cables from from Tele Aid control module (A).
^
Slide Tele Aid control module (A) out of mounting bracket (C, Figure 11).
12. Proceed to Subject E: Initialize and Register Tele Aid Control Module.
E. Initialize and Register Tele Aid Control Module:
1. Continue with initial start-up (follow on-screen instructions).