C 320 4MATIC Sedan (203.084) V6-3.2L (112.953) (2003)
Rear Knuckle: Testing and Inspection
Measuring Wheel Carrier (removed)
Shown On Left Wheel Carrier
1
Remove/install wheel carrier
2
Place wheel carrier for measurement with the wheel hub or brake disc on parallel supports
3
Measure and note height dimension "A" as comparative measurement with the height marking device (025)
4
Measure and note height dimension "B1-B3" at the lowest point of the corresponding bore
NOTE: The test values are calculated from the difference between height dimension "A" and the height dimensions:
-
"B1" = thrust arm mounting
-
"B2" = tie rod mounting
-
"B3" = torque strut mounting