C 320 4MATIC Sedan (203.084) V6-3.2L (112.953) (2003)
Wheel Hub: Service and Repair
AR35.20-P-0130-04GH Pulling Jammed Rear Axle Shaft Flange Out and In (Wheel Carrier
Removed)
AR35.20-P-0130-04GH Pulling jammed rear axle shaft flange out and in (wheel carrier removed)
Special Tools
Special tool assignment:
Model 129, 140, 163, 170, 202, 203, 208, 209, 210, 215, 220:
Extraction tool 202 589 04 43 00
Model 140, 163, 215, 220:
Extraction and installation tool 140 589 08 43 00
Model 129, 170, 202, 203, 208, 209, 210:
Extraction and installation tool 124 589 05 43 00
Component Identification
Press out jammed rear axle shaft flange
1
Press out rear axle shaft flange (10) using extraction tool parts and a suitable drift (010x) on a stationary hydraulic press.
The diameter of the drift (010x) must be approx. 2 mm smaller than the rear axle shaft flange diameter (see detail).
Illustrated on model 210