C 320 4MATIC Sedan (203.084) V6-3.2L (112.953) (2003)
8
Unscrew wiring harness (6) (arrows) and expose as far as hydraulic pump
NOTE: Installation: Route hydraulic pump cable in the slot for the wiring harness.
9
Unscrew pressure line (2) from hydraulic pump (3)
10
Unscrew hydraulic pump (3)
NOTE: Installation: Route cable between transmission housing and hydraulic pump.
-
Do not trap the cable.
11
Disconnect suction line (4)
12
Install in the reverse order
13
Check and correct hydraulic oil level