C 320 Sedan (203.064) V6-3.2L (112.946) (2001)
1. Remove interior door panel, refer to WIS documents AR72.10-P-1000P (front door) and AR72.12-P- 1040P (rear door).
2. Detach lower half of the weather shield/sound insulation and hold up with duct tape.
3. Lower window to the assembly position to access the window clips.
4. Use duct tape to support window in this position.
5. Remove one clip (Figure 1) at a time (front window only) and replace with redesigned clip (Figure 2 & 3).
NOTE:
The window must be touching and aligned with the vertical guide rail before tightening the retaining bolt.
6. Fasten weather shield/sound insulation back in place.
7. Reinstall interior door panel, refer to WIS documents AR72.10-P-1000P (front door) and AR72.12-P-1010P (rear door).
8. Check express open and close functions.
Parts Information
NOTE:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
October 29, 2008. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.
In Case of Warranty
Operation: Inner door panel - on one front door, R & R (72-6405)
Inner door panel - one rear door, R & R (72-6420)
Plastic clips for windows specify location...(inner door panel removed), replace (02-5214)
Inner door panels - on all doors, R & R (72-6500)
NOTE:
Operation 02-5214 is per door