C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
/v6-3.2l_(112.946)/Page-3171009.png)
1. Remove plugs for holes (A) in side members.
Stop plugs can be discarded.
2. Remove plug for the 36 mm dia. hole (B) below the left taillamp.
Stop plug can be discarded.
Installation shown on model 203.0 with shortened longitudinal member reinforcement
3.1 Tighten the right longitudinal member reinforcement (6) and left longitudinal member reinforcement (7) finger-tight with two bolts (11) each.
On vehicles with long right longitudinal member reinforcement (6) and long left longitudinal member reinforcement (7), these must first be
inserted into the longitudinal members of the vehicle.
4. Push on seals (5).
5. Screw in threaded studs (12) (see individual picture) in left and right bracket of trailer hitch.
