C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
/v6-3.2l_(112.946)/Page-844001.png)
Crankshaft Seal Retainer: Removal and Replacement
AH01.40-P-1000-06A Notes application of sealant to end cover with radial shaft seal
Component Identification
Application of sealant to end cover
The lines drawn G, E and the arrow D mark the application of sealant.
Clean sealing surfaces, apply sealant only to the specified surfaces with a bead of 2.0 mm ± 0.5 mm.
The sealant must be applied within 10 minutes!
The silicone bead must not be spread. Only the approved silicone sealant may be used may be used.
