C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
DANGER:
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
1
Remove engine mounts
2
Dismount right engine support (2) from crankcase
NOTE: For this step, unscrew bolts (1)
CAUTION: Installation: Bolts (1) must be replaced, because the connection can loosen or the screws can tear off if reused.
3
Remove right engine support (2)
NOTE: Installation: Ensure that the electrical lines are not pinched.
4
Install in the reverse order
AR22.10-P-4350PV Remove/Install Left Engine Support
Remove/Install Left Engine Support
DANGER: