C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
Component Identification
6
Place a cloth below timing chain.
7
Position riveting tool (2) so that timing chain is resting on the spacer bars (arrow).
8
Tighten spindle (7) until a firm resistance is felt.
While turning the spindle (7) ensure that the pins of the riveted link are inserted into the holes of the outer plate.
9
Remove rivet press tool (2).
Component Identification
10
Turn over moving assembly insert (4) with the digit D5 to the riveting section (arrow).