C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
/v6-3.2l_(112.946)/Page-1193007.png)
^
Remove nut (arrow, Figure 11) then remove circuit 30 harness connector (A) from terminal stud on alternator (B).
^
Loosen upper alternator mounting bolt (B, Figure 12).
^
Remove lower alternator mounting bolt (A), then remove upper alternator mounting bolt (B).
^
Remove alternator from mounting brackets.
Note:
Do not remove alternator from engine compartment.
^
Position alternator (A, Figure 13) with regulator facing up and pulley facing down. REGULATOR WILL BE REPLACED WITH
ALTERNATOR IN ENGINE COMPARTMENT (proceed to Subject F).
Note:
Coolant hose (Figure 12) is repositioned for clearance. Return hose to installed position after reinstallation.
