C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
/v6-3.2l_(112.946)/Page-1252001.png)
Crankshaft Position Sensor: Service and Repair
Remove/Install Crankshaft Position Sensor
Shown On Engine 113 In Model 220
Work Instructions
NOTE: Remove Air cleaner (engine side).
Crankshaft position sensor to engine block - 8 N.m
NOTE: If the crankshaft position sensor (L5) was replaced, a re-initialization must be carried out with STAR DIAGNOSIS in the menu item control
module adaptations.
