mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF07.61-P-0001-06A Motor Electronics (ME-SFI) Fuel Injection and Ignition System Control Unit, Input Signals|Page 739 > < GF07.61-P-0001-06A Motor Electronics (ME-SFI) Fuel Injection and Ignition System Control Unit, Input Signals|Page 737
Page 3
background image

Voltage supply

The ME-SFI control unit is supplied with voltage at circuits 87 and 30 as follows (fused/unfused):
Model 129, 140 

by the base module

Model 170, Model 210 up to 2/97

by the relay module

Model 202, 208,
Model 210 as of 3/97

by the fuse and relay module

MODEL 163

by the fuse and relay moduleF1

Model 215, 220

by the right fuse and relay module (K40/7)

Model 203, 209, 211

from SAM control unit with fuse and relay module (N10/1)

Model 230

Right fuse and relay module (K40/4)

Ground connections of output stages

Several ground connections of the ignition output stages and the ground of the electronics are attached close to the ME control unit (major assemblies
compartment partition, wheelhouse or body).

The ME control unit features a short-circuit protection as well as a reversed polarity protection in the operating voltage range.

In certain cases voltage is supplied through several pins connected in parallel by means of bridges to relief the electrical connectors.

GF07.61-P-0001-06A Motor Electronics (ME-SFI) Fuel Injection and Ignition System Control Unit, Input Signals|Page 739 > < GF07.61-P-0001-06A Motor Electronics (ME-SFI) Fuel Injection and Ignition System Control Unit, Input Signals|Page 737