C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
Control Arm Bushing: Service and Repair
AR35.20-P-0114P Remove/Install Spring Link, Replace Rubber Mount
AR35.20-P-0114P Remove/Install Spring Link, Replace Rubber Mount
- except CODE (P98) Black Series [model 209]
Work Instructions
DANGER:
-
Risk of fatal accident from vehicle slipping or toppling off the lift platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer
CAUTION: Installation Replace self-locking nuts and bolts
NOTE: Remove and install rear spring
6
Track control arm
NOTE: When tightening the nuts and bolts, move rear axle shaft to approximately horizontal position
6B Rubber bearing to spring link
-
If necessary after checking: Remove and install spring link rubber mount.
6g Spring link covering
6j Shock absorber at spring link