C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
/v6-3.2l_(112.946)/Page-2670002.png)
5.
Screw on both caps for the rubber mounts (Figures 2 and 3). Use a new bracket if the torsion bar diameters are 20 mm and 21 mm.
6.
Reinstall the torsion bar and lower engine paneling in reverse order.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
November 2, 2007. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In case of warranty, use the table.
