C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
/v6-3.2l_(112.946)/Page-1916011.png)
Component Identification
Show on model 230
Measured Values Screen For Angle 4, Display E.G. 2.68 Degrees
The meter is ready to take a measurement. The value measured is shown on the display.
7
Press SAVE button. The values are saved.
Measured values screen for angle 4, display e.g. 2.68 degrees
Confirmation Screen
A confirmation message appears briefly and then the meter indicates that it is ready to measure the next angle (angle 5). The measurement is
completed and stored in memory.
8
Remove sensor (020a) from rear axle center assembly.
9
Remove rear axle center assembly adapter (020h).
10
Detach sensor mount (020c) from sensor (020a).
Confirmation screen
AR41.10-P-0086-02P Prepare Electronic Propeller Shaft Inclinometer
AR41.10-P-0086-02P Prepare electronic propeller shaft inclinometer
