C 320 Wagon (203.264) V6-3.2L (112.946) (2004)
Wiper Motor: Removal and Replacement
AR82.30-P-6800P Remove/Install Wiper Motor
AR82.30-P-6800P Remove/Install Wiper Motor
Shown On Model 203.0
DANGER:
Injury Hazard - Windshield wiper mechanism can pinch, crush or, in extreme cases even sever extremities.
-
Always remove ignition key when working on windshield wiper mechanism.
1
Remove wiper system. See: Service and Repair
2
Cut through cable straps (1)
3
Pry off right articulated rod (2) from ball-jointed arm (6) and remove
CAUTION: Do not loosen or remove nut (4).
4
Prize left articulated rod (3) from ball-jointed arm (6) and remove
5
Unscrew bolts (5).
Screw on Wiper Motor Attachment
Model 203 - 13 N.m
Model 209 - 9 N.m
6
Remove wiper motor (M6/1) from linkage
7
Install in the reverse order
AR82.30-P-6900PA Remove/Install Rear Wiper Motor
AR82.30-P-6900PA Remove/Install Rear Wiper Motor