C 350 (203.056) V6-3.5L (272.960) (2006)
/v6-3.5l_(272.960)/Page-869003.png)
Use exclusively approved sealants. Do not spread bead (A). Mount end cover (2) within 5 minutes after applying sealant.
Component Identification
4
Mount end cover (2) with crankshaft radial sealing ring (1) on insertion tool (6).
Make sure that protective lip (1s) faces towards the side applying the force and sealing lip (1d) faces in the direction of the crankcase (4). Leakage
could occur otherwise at rear crankshaft radial sealing ring (1).
The crankshaft radial sealing ring (1) can only be mounted on the insertion tool (6), if insertion tool (6) is fitted together with insertion tool (7).
Component Identification
