C 350 (203.056) V6-3.5L (272.960) (2006)
Accelerator Pedal: Service and Repair
AR30.12-P-1321P Remove/Install Accelerator Pedal
Remove/Install
1
Remove plug (1)
2
Unscrew nut (2)
NOTE: Installation: Replace nut (2).
3
Pull out accelerator pedal (3)
NOTE:
-
The accelerator pedal (3) must not be disassembled.
-
Installation: Ensure, that the recess of the accelerator pedal is seated in the bracket (4) of the firewall.
4
Separate electrical connector of accelerator pedal sensor (B37)
NOTE: Installation: ensure that lines are routed properly.
5
Separate electrical connector from kickdown switch (S16/6)
NOTE: Installation: ensure that lines are routed properly.
6
Remove accelerator pedal (3)
7
Install in the reverse order
8
Read out DTC memory